IGC Code (International Code of the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk)
ID 3631 | 14.02.2017
The International Code of the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk (IGC Code), adopted by resolution MSC.5(48),has been mandatory under SOLAS chapter VII since 1 July 1986. The IGC Code applies to ships regardless of their size, including those of less than 500 gross tonnage, engaged in carriage of liquefied gases having a vapour pressure exceeding 2.8 bar absolute at a temperature of 37.8°C, and certain other substances listed in chapter 19 of the Code. The aim of the Code is to provide an international standard for the safe carriage by sea in bulk of liquefied gases and the substances listed in chapter 19, by prescribing the design and construction standards of ships involved in such carriage and the equipment they should carry so as to minimize the risk to the ship, to its crew and to the environment, having regard to the nature of the products involved.
The basic philosophy is one of ship types related to the hazards of the products covered by these codes, each of which may have one or more hazard properties. A further possible hazard may arise owing to the products being transported under cryogenic (refrigerated) or pressure conditions.
Severe collisions or strandings could lead to cargo tank damage and uncontrolled release of the product. Such release could result in evaporation and dispersion of the product and, in some cases, could cause brittle fracture of the ship's hull. The requirements in the codes are intended to minimize these risks as far as is practicable, based upon present knowledge and technology.
Throughout the development of the Code it was recognized that it must be based upon sound naval architectural and engineering principles and the best understanding available as to the hazards of the various products covered; furthermore that gas carrier design technology is not only a complex technology but is rapidly evolving and that the Code should not remain static. Therefore, IGC Code is kept under review, taking into account experience and technological development. The latest comprehensive amendments of the IGC Code were adopted by resolution MSC.370(93), expected to enter into force on 1 July 2016.
Code for the Construction Equipment of Ships Carrying Liquefied Gases in Bulk (GC Code) and Code for Existing Ships Carrying Liquefied Gases in Bulk (EGC Code)
Gas carriers constructed before 1 July 1986 and after 31 October 1976 should comply with the requirements of the Code for the Construction Equipment of Ships Carrying Liquefied Gases in Bulk (GC Code), while gas carriers that had already been trading prior to the application of the GC Code should comply with the requirements of the Code for Existing Ships Carrying Liquefied Gases in Bulk.
Nota INL e Conferenza delle Regioni e delle Province autonome 14.07.2025 - Indebita attribuzione delle funzioni del preposto ID 24293 | 17.07.2025 / In allegato Nota congiunta INL e Conferenza delle Regioni e delle Province autonome 14.07.2025OGGETTO: Possibile attribuzione indebita delle funzioni…
Leggi tutto
Norme serie EN ISO 10855-X / Container per strutture in mare ID 24292 | 17.07.2025 / Preview in allegato Norme della serie UNI EN ISO 10855-X Container per strutture in mare e relativi dispositivi di sollevamento. Nel dettaglio: - UNI EN ISO 10855-1:2025 - UNI EN ISO 10855-2:2025 - UNI EN ISO…
Leggi tutto
Piani Nazionali di Ristrutturazione degli Edifici EPBD 2024 (Direttiva Case Green) - Strumenti operativi ID 24291 | 17.07.2025 / In allegato Strumenti operativi I Piani Nazionali di Ristrutturazione degli Edifici (PNRB) rappresentano lo strumento strategico principale per attuare la direttiva EPBD…
Leggi tutto
Direttiva (UE) 2024/1275 (EPBD): Pacchetto strumenti guida CE 30.06.2025 ID 24290 | 17.07.2025 La Commissione Europea il 30 giugno 2025 ha presentato un pacchetto di documenti il cui intento è fornire il necessario supporto ai vari Paesi europei per l’attuazione operativa della Direttiva Case…
Leggi tutto
Nota INL prot. n. 288 del 15 luglio 2025 - Patente a crediti: riconoscimento crediti aggiuntivi ID 24289 | 16.07.2025 / In allegato Nota INL prot. n. 288 del 15 luglio 2025OGGETTO: riconoscimento crediti aggiuntivi Il D.M. n. 132/2024 ha previsto la possibilità di incrementare il punteggio iniziale…
Leggi tutto
Comunicazione CE 16.07.2025 - Promozione energia elettrica da fonti rinnovabili (Direttiva RED III energie rinnovabili) ID 24288 | 16.07.2025 / In allegato Comunicazione della Commissione - Orientamenti sull'articolo 20 bis, relativo all'integrazione nel sistema dell'energia elettrica da fonti…
Leggi tutto
Regolamento di esecuzione (UE) 2025/1379 ID 24287 | 16.07.2025 Regolamento di esecuzione (UE) 2025/1379 della Commissione, del 15 luglio 2025, che modifica il regolamento (UE) n. 142/2011 per quanto riguarda la tenuta digitale dei registri nonché i modelli del documento commerciale e dei…
Leggi tutto
Regolamento (UE) 2025/1377 ID 24286 | 16.07.2025 Regolamento (UE) 2025/1377 della Commissione, del 15 luglio 2025, che modifica e rettifica il regolamento (UE) n. 142/2011 per quanto riguarda determinate prescrizioni per l’immissione sul mercato e le importazioni di sottoprodotti di origine animale…
Leggi tutto
Circolare ANSFISA Prot. 0010518 del 10 Febbraio 2025 ID 24285 | 15.07.2025 / In allegato Obblighi di cui all’art. 79, c. 17, del DPR n. 207/2010, all’art. 18, c. 22, dell’Allegato II.12 al D.lgs n. 36/2023 e all’art. 15, c. 1, lett. p), dell’Allegato II.14 al medesimo decreto.Procedure per…
Leggi tutto
Circolare ANSFISA Prot. 90791 del 10 Dicembre 2024 ID 24824 | 15.07.2025 Oggetto: Attività di verifica, manutenzione, progettazione, adeguamento e nuovo impianto dei dispositivi di ritenuta stradale In riferimento all’oggetto e nell’ambito dell’attività di promozione della sicurezza delle…
Leggi tutto
Nota INL e Conferenza delle Regioni e delle Province autonome 14.07.2025 - Indebita attribuzione delle funzioni del preposto ID 24293 | 17.07.2025 / In allegato Nota congiunta INL e Conferenza delle Regioni e delle Province autonome 14.07.2025OGGETTO: Possibile attribuzione indebita delle funzioni…
Leggi tutto
Norme serie EN ISO 10855-X / Container per strutture in mare ID 24292 | 17.07.2025 / Preview in allegato Norme della serie UNI EN ISO 10855-X Container per strutture in mare e relativi dispositivi di sollevamento. Nel dettaglio: - UNI EN ISO 10855-1:2025 - UNI EN ISO 10855-2:2025 - UNI EN ISO…
Leggi tutto
Nota INL prot. n. 288 del 15 luglio 2025 - Patente a crediti: riconoscimento crediti aggiuntivi ID 24289 | 16.07.2025 / In allegato Nota INL prot. n. 288 del 15 luglio 2025OGGETTO: riconoscimento crediti aggiuntivi Il D.M. n. 132/2024 ha previsto la possibilità di incrementare il punteggio iniziale…
Leggi tutto
Salute e sicurezza negli ambienti di vita e di lavoro / Infortuni negli stabilimenti PIR / INAIL 2025 ID 24279 | 14.07.2025 / In allegato Ai fini della caratterizzazione del settore “Seveso” da un punto di vista infortunistico, è stata messa a punto una specifica metodologia per aggregare i dati…
Leggi tutto
UNI ISO 22340:2025 / Guidelines for an enterprise protective security architecture and framework ID 24267 | 10.07.2025 / In allegato UNI ISO 22340:2025Sicurezza e resilienza - Sicurezza protettiva - Linee guida per un'architettura e un quadro di sicurezza di protezione aziendale. Data…
Leggi tutto
Linee guida per il controllo di STEC nel latte - Ministero della Salute rev. 03.07.2025 ID 24266 | 10.07.2025 / In allegato Linee guida per il controllo di STEC nel latte non pastorizzato e nei prodotti derivati Da qualche anno ha assunto significativa rilevanza il problema della contaminazione di…
Leggi tutto
Nota prot. n. 5944 dell’8 luglio 2025 / Provvedimento di interdizione ante/post partum. Indicazioni operative ID 24264 | 10.07.2025 / In allegato Nota prot. n. 5944 dell’8 luglio 2025Oggetto:d.lgs. n. 151/2001: provvedimento di interdizione ante/post partum. Indicazioni operative. Allo scopo di…
Leggi tutto
Nota INL Prot. n. 5945 dell'08 luglio 2025 - Art. 65 del d.lgs. n. 81/2008 / Controlli ID 24263 | 10.07.2025 / In allegato Nota e Modulo di comunicazione in deroga Nota INL Prot. n. 5945 dell'08 luglio 2025Oggetto: Art. 65 del d.lgs. n. 81/2008, modificato dall’art. 1, co 1, lett. e, legge n.…
Leggi tutto
UNI/TS 11983-1:2025 - Riparazione / costruzione / modifica tramite saldatura attrezzature a pressione non PED ID 24262 | 10.07.2025 / Preview in allegato UNI/TS 11983-1:2025Riparazione di attrezzature a pressione e costruzione e modifica di attrezzature a pressione non disciplinate dalle direttive…
Leggi tutto
UNI/PdR 175:2025 / Metodologie manutenzione delle tubazioni di scarico a gravità con tecnologie CIPP ID 24261 | 10.07.2025 / In allegato UNI/PdR 175:2025Metodologie e sistemi per il rinnovamento, la connessione e la manutenzione delle tubazioni di scarico a gravità (max. 0,5 bar) con tecnologie…
Leggi tutto